CeilAir CW series Návod k obsluze stáhnout pdf (Strana 16)

(©July, 2008)

CeilAiR OHS Series Installation, Operation & Maintenance Manual

ir Technology Systems, Inc.

2-5

CAUTION

The probes must not touch the mounting surface.

Failure to adhere to this may result in improper

operation of equipment.

2.4.5.4 Cable Type Water Detector

Lay the cable water detector across the surface where

water could collect.

When water is

present, current will

flow between the two

wires.

2.5 Air Distribution Connection

2.5.1 Spot Cooler (See Figure 2)

For units that are not ducted, the air conditioner should

be mounted above the ceiling grid, leaving sufficient

space for the air grilles to rest on the ceiling T-bar.

NOTE

Placement of the grilles is important. The hinged

filter grille goes on the return air side of the unit.

The 3-way directional grille goes on the condi-

tioned air discharge side of the air conditioner.

Gasketing is factory supplied for an air seal be-

tween the bottom flange of the air conditioner

and the grille. After mounting the air conditioner,

lower the air conditioner until the gasket meets

the grille.

Figure 2- Spot Cooler Grille

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Žádné komentáře

CeilAir CW series Návod k obsluze Strana 16